Most cleaning damage comes from correct effort applied with the wrong method: high pressure on soft masonry, harsh stripper on the wrong tile, an abrasive pad on a polished floor. Professional cleaning is largely the discipline of matching — tool to task, chemistry to surface, technique to material. Here's how we approach it across our services.
Floor Care Equipment
Commercial floors need machine work: automatic scrubbers for large hard-floor areas, low-speed machines for scrubbing and stripping, and high-speed burnishers for finish maintenance where gloss is part of the standard. Pads and brushes are chosen by aggressiveness for the surface and task — the difference between restoring a floor and scarring one. On strip-and-wax work, methodical chemistry matters as much as machinery: stripper matched to the finish, thorough neutralizing rinses, and thin finish coats with real cure time between them.
Pressure Washing Done by Surface
Pressure and temperature are variables, not defaults. Hot water with appropriate degreasers for gum, grease, and food service areas; adjusted pressure and technique for concrete versus softer masonry versus painted surfaces; and wash-water containment and recovery practices designed for California stormwater compliance on every exterior job. The hot-versus-cold distinction is one of the most consequential choices in exterior cleaning, and we make it deliberately per job.
Window Cleaning Systems
Traditional squeegee work delivers detail at storefront level; water-fed poles with purified water let us clean exterior glass several stories up safely from the ground — purified water dries spot-free, which is what makes the method work. Frames, sills, and tracks are part of the job, and screens are handled and re-installed with care.
Dust Control and Interior Equipment
On post-construction and fine-dust work we use HEPA-filtration vacuums so captured dust stays captured, microfiber for surface work because it holds dust rather than redistributing it, and top-down sequencing so nothing cleaned gets re-contaminated by work above it. It's not glamorous — it's just the difference between removing construction dust and rearranging it.
Chemistry Matched to Surface — and to People
Products are chosen per surface and per environment: EPA-registered disinfectants applied with correct label dwell times where disinfection matters, neutral cleaners where harsh chemistry would damage finishes, degreasers where grease actually is, and eco-friendlier options where they genuinely do the job. The label is the protocol; crews are trained to follow it.
Related: Our Cleaning Process · Safety & Site Standards · Commercial Floor Care Guide